This Sea Aquarium screensaver is a true 3D experience. Tickle the fish, feed the fish, set the lighting to change automatically. You get four extremely realistic scenes and 10 tropical fish which swim under the surface water which ripples as the light that shines through.

Auburn 851 Speedster 3D MODEL - In general its design was based on purchased units. The Speedster's engine with a compressor that has an original design, a gear box with free-wheel clutch and a two-step reducer of a rear axle with a vacuum shifter can be named as some technical zests. Auburn 851 Speedster gained its place in history due to outstanding styling the author, Leamy Al. He designed the graceful curved surface of the car's body, and precisely verified all the proportions. Cord Erret Lobban was a supervisor over the design and manufacturing, he is an owner of this and some other car firms.

Rolls-Royce Silver Ghost 3D MODEL has the aluminium colour varnishing and silvered accessories. The engine was supplied with a system of bronze pipes for a cooling liquid, fuel and oil distributing. In-line six cylinders had two blocks with fixed heads and one carburettor with an ascending flow.

Austin Mini 3D MODEL is a car, with four wheels at each corner; all the space between them was efficiently distributed among a compact power unit with the engine allocated crosswise. In the pallet of the car there was a gear box, and it had a four-seat salon.

Jaguar SS 100 3D MODEL is quite clear. Peculiarities of the design were a rail frame, on which there were a two-place open body with a wooden frame and metal skin. In-line six-cylinder engine with two carburettors and valves in the cylinders' head could achieve 125 h/p.

AC Cobra 427 3D MODEL is one of the most successful creations. No doubt, the automobile of the 60s has been repeatedly and considerably modernized during its long life, however it is always recognizable and beloved by its admirers.

Willys MB 3D MODEL had a rigid rail frame, a drive gear on all wheels, a depended suspension leaf, and a spare wheel on a back wall of the body. It also had the tires with facility grousers for driving on sand, snow and wet ground which are typical for off-highway cars.

Mercedes-Benz 300 SL 3D MODEL was the first road car with port injection! The car looked compact and stood out by its individuality not only in structure, but also in design. The doors opened upward, leaving a high threshold. It was rather problematic to enter and exit the car, especially for women.

Ferrari F50 3D MODEL is not surprising that rush lines which highlight the car's sports character amazes you from the very beginning. Its twelve-cylinder engine, which is traditional for this lead model of the firm, is allocated in the middle of a composed body of the most original design.

Benz Dreirad 3D MODEL was operated by a four-cylinder four-cycle engine, which had an electrical ignition and a vaporizing carburetor. The cooling of the engine was done by way of sprinkling. The back axis was connected to a tubular frame, and the forward wheel was not cushioned.

Alfa Romeo Spider 3D MODEL is rather a cheap, economic and technological model by applying base units and technology of the mass car; however, due to dynamic and running qualities it has an absolute right to be considered a sports car.

Ford T was the most popular among many drivers. It had a lot of progressive and interesting constructive decisions: a planetary gearbox and steering, a frame made of vanadium steel, a removable cylinders' head and an electrical ignition.

Porsche 911 Carrera 4 3D MODEL is an incredible case, because according to the design science cars with an air-cooling engine allocated behind a rear axle are to have poor driving quality. It gain the sympathy of many fans, not only buy it, but also those who simply loves and understands the cars.

Lamborghini Countach 3D MODEL was equipped with a twelve-cylinder V- shaped engine, which was used only by Ferrari and Jaguar at that time. This automobile, which does not look old-fashioned even today, designed by Gianpaolo Dallara in 1971!

Chevrolet Corvette 3D MODEL had a rail frame, a depended back suspension leaf, it was quite traditional, but it had a light plastic body and it was very progressive for the time. Harley Earl was the stylist of this elegant and externally fast car.

3D Car Collection contains 19 specific cars which were noticeable landmarks in automobile history and each has it's own point of interest. You will see the first automobile ever made in the world,"The Benz" built in 1886. There is a range of cars representing technical innovation, and more.

Rolls-Royce Silver Cloud 3D MODEL is intended not for individual, but for serial production. By the fortune it was also the last six-cylinder model of Rolls-Royce. It had a rail frame, which was replaced on the subsequent models by an integral body. And it was an innovation.

Citroen Traction Avant was liked by taxi drivers, gangsters and policemen. It brought more sensational innovations, such as: an independent torsion suspension of all wheels, easily removed "wet" sleeves of cylinders, a forward drive with an engine behind the axis of forward wheels.

Mercedes-Benz 230E 3D MODEL' s Technical parametersare rather moderate, but one should not be disappointed: all cars of this family can be considered an ideal vehicle for a respectable consumer who wants to feel safe on streets and roads, and drive with comfort and without problems.

Ford GT40 3D MODEL were produced for races of the sports prototypes. The appearance of the cars for common use became possible because according to the rules of the competitions only those models, which were produced by a series, not less than a certain minimum, could take part in the exhibition.